GA2003A1 Forensic Autopsy Table pathology Workstation Anatomy Equipment

Forensic Autopsy Table pathology Workstation Anatomy Equipment Description：

Autopsy table is entirely made of stainless steel, with perforated worktops to ensure all harmful vapors are sucked down. The worktop is fitted with a high perimeter border, a seamless welded pool surrounded by a contour border and overflow tube mounted at the end of the Mortuary table. Forensic Equipment's integrated Sprinkler system ensures continuous table disinfection. All power connections, including air piping, are built into the base and can be easily accessed through inspection openings.

Forensic Autopsy Table pathology Workstation Anatomy Equipment Features：

1.Mesa circular arc connection, not easy to scale, easy to clean and disinfection
2.The sink is equipped with a hair isolator to prevent the hair from getting into the drainage pipe and becoming blocked
3.The shredder below the pool can crush dissected tissue and discharge it through the drain
4.The grinder is equipped with induction motor, start and cut off flow. Acid and alkali resistant
5.Equipped with cold and heat regulator, induction manual faucet (to be connected to the water heater)
6.The water pressure of the mobile spray washing gun can be adjusted to flush the overall dirt of the anatomical table
7.The table is equipped with 3 screen isolation plates, which can be removed and washed
8. The side of the platform has leakage protection device, waterproof socket 220v. 50HZ
9. 1.Table side with 8 flush taps, easy to wash the anatomy process of dirt
10.Negative pressure air draft system: upper air draft adopts the way of inclined air draft on both sides of the table and downward, while lower air draft adopts the way of opening holes around the base for inhalation, so as to extract the harmful gas during the anatomical process timely (external air draft system shall be connected).
11.The moving disk on the top of the table can be used for viscera placement in the process of anatomy (optional)